Competition Upgrade Parts

Taylor Freelance

Glock Magazine Basepad + 5-6 Rounds

Glock 9mm/40S&W +5 Magazine Basepad with Spring by Taylor Freelance +6 capacity in 9mm or +5 capacity in 40S&W additional performance! Legal for USPSA, 3-Gun competition (meets the 140mm rule) Works with Carver Custom "Big...

KynShot

Hydraulic Recoil Buffer for VR80 Shotgun by KynSHOT

Features Dampens Bolt Carrier Movement for Smoother Cycling Reduces Recoil and Vibration Reduces Wear on Parts Speeds Sight Recovery Stainless Steel Construction With a simple drop-in replacement of the standard buffer with a KynSHOT buffer you can...

Derya Arms

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

Derya Arms

VR80 "S-SLOTS" FUNITURE SET, BURNT BRONZE, ALUMINUM W/FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

Derya Arms

VR80 "S-SLOTS" FUNITURE SET, BLACK ALUMINUM W/FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

VR80 "S-SLOTS" FUNITURE SET, BLACK ALUMINUM W/FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD **Proper gunsmith fitting required for accurate fit & safe function.

Derya Arms

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ REAR RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

Derya Arms

VR80 "TRIANGLES" FURNITURE SET, OD GREEN, ALUMINUM W/FULLRAIL FOREND, PISTOL GRIB, SHORT SHROUD

Taylor Freelance

RIA 1911 A2 +1 Magazine Competition Basepad by Taylor Freelance

#html-body [data-pb-style=XNR25G6]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body...

J&E Machine Tech

Aluminum AR15 45 Degree Offset Flip-Up Gun Sights

Derya Arms

VR80 / 12 ga. Shotgun Extended Choke Tube Wrench

Variable Air Sport Rings Recoil Pin Fits 9.5mm through 13mm rails Torx 4-screw cap to reduce stripping Made from lightweight aircraft aluminum Satin black finish Product Specific Details Ring height - 1.39" **Proper gunsmith fitting required for accurate...

Derya Arms

VR80 Factory Flat Face Trigger

VR80 Factory Flat Face Trigger This is a direct replacement from factory. This will not reduce the trigger pull of your firearm. Specifically made for RIA VR80 only.     **Proper gunsmith fitting required for accurate fit & safe function.  

Derya Arms

VR60 / VRBP100 / Lion - Medium Compensator

RIA VRBP-100 / VR60 Non-Threaded Compensator Easy to install and disassemble Reduces muzzle rise when firing Clampdown style which enables the user to attach to other shotguns with similar barrel diameter as the RIA VRBP-100 RIA VR60 Shotguns    ...

Taylor Freelance

RIA VR Series +3 Magazine Extension by Taylor Freelance

Designed by Taylor Freelance created for additional ammunition when needed. This magazine basepad/extension is designed to accommodate the needs in the range for speed shooters! Extend your 9-round VR80 shotgun magazine by THREE rounds to 12+1!...

Derya Arms

VR80 Compensator Short Comp. - Old

VR80 Short Compensator Version-1 Compensators Uses the compensator locking ring to tighten the short and long compensator in place. Long compensators uses a set screw to keep it in place. Easy to install for competition Reduces muzzle rise when...

Derya Arms

VR80 Compensator Long Comp. - Old

VR80 Long Compensator Version-1 Compensators Uses the compensator locking ring to tighten the short and long compensator in place. Long compensators uses a set screw to keep it in place. Easy to install for competition Reduces muzzle rise when...

Armscor Philippines

1911 - FS/MS/CS - Front Fiber Optic Sight Housing w/o Rod

1911 - FS/MS/CS - Front Fiber Optic Sight Housing w/o Rod Height - 0.175" Diam. - 0.240"     **Proper gunsmith fitting required for accurate fit & safe function.  

Derya Arms

VR80 Short "Thick Boy - Holes" Barrel Shroud (for LONG HANDGUARDS)

VR80 Short "Thick Boy - Holes" Barrel Shroud (for LONG HANDGUARDS) Short "thick boy - holes" barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A...

Derya Arms

VR80 Short "Holey" Barrel Shroud (for LONG HANDGUARDS)

VR80 Short "Holey" Barrel Shroud Short "holes" barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Short Slotted Barrel Shroud (for LONG HANDGUARDS)

VR80 Short Slotted Barrel Shroud Short slotted barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Short Twisted Barrel Shroud (for LONG HANDGUARDS)

VR80 Short Twisted Barrel Shroud Short twisted barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Extended Bolt Release Lever - Neon Orange

VR80 Extended Bolt Release Lever Proprietary for the VR80 Steel Two-piece design for easier installation/disassembly   *This product is designed to fit the VR80 and may not fit firearms     **Proper gunsmith fitting required for accurate fit & safe...

Derya Arms

VR80 Extended Bolt Release Lever - Black

VR80 Extended Bolt Release Lever Proprietary for the VR80 Steel Two-piece design for easier installation/disassembly   *This product is designed to fit the VR80 and may not fit firearms     **Proper gunsmith fitting required for accurate fit & safe...

Derya Arms

VR80 Extended Handguards - Holes - Front & Rear Rail *BLEMISHED*

This product is BLEMISHED All items are sold in an "AS-IS" condition. We will not accept returns and refunds. Please read below for more information.RIA Imports / Derya - Factory VR-Series Forends VR80 Forend Assembly, Holes, Front & Rear Rail Each...

J&E Machine Tech

SOPMOD Mil-Spec Buttstock by J&E Machine Tech

SOPMOD Mil-Spec Buttstock by J&E Machine Tech Fits: AR10 / AR15 Mil-Spec SOPMOD Stock, Black Stock adjustable to 6 positions Made in the USA     **Proper gunsmith fitting required for accurate fit & safe function.