VR80 Competition Upgrades

KynShot

Hydraulic Recoil Buffer for VR80 Shotgun by KynSHOT

Features Dampens Bolt Carrier Movement for Smoother Cycling Reduces Recoil and Vibration Reduces Wear on Parts Speeds Sight Recovery Stainless Steel Construction With a simple drop-in replacement of the standard buffer with a KynSHOT buffer you can...

Derya Arms

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ FULL RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

Derya Arms

VR80 "SLOTS" FURNITURE SET, BLACK ALUMINUM W/ REAR RAIL FOREND, PISTOL GRIP AND SHORT SHROUD

Derya Arms

VR80 "TRIANGLES" FURNITURE SET, OD GREEN, ALUMINUM W/FULLRAIL FOREND, PISTOL GRIB, SHORT SHROUD

J&E Machine Tech

Aluminum AR15 45 Degree Offset Flip-Up Gun Sights

Derya Arms

VR80 / 12 ga. Shotgun Extended Choke Tube Wrench

Variable Air Sport Rings Recoil Pin Fits 9.5mm through 13mm rails Torx 4-screw cap to reduce stripping Made from lightweight aircraft aluminum Satin black finish Product Specific Details Ring height - 1.39" **Proper gunsmith fitting required for accurate...

Derya Arms

VR60 / VRBP100 / Lion - Medium Compensator

RIA VRBP-100 / VR60 Non-Threaded Compensator Easy to install and disassemble Reduces muzzle rise when firing Clampdown style which enables the user to attach to other shotguns with similar barrel diameter as the RIA VRBP-100 RIA VR60 Shotguns    ...

Taylor Freelance

RIA VR Series +3 Magazine Extension by Taylor Freelance

Designed by Taylor Freelance created for additional ammunition when needed. This magazine basepad/extension is designed to accommodate the needs in the range for speed shooters! Extend your 9-round VR80 shotgun magazine by THREE rounds to 12+1!...

Derya Arms

VR80 Compensator Short Comp. - Old

VR80 Short Compensator Version-1 Compensators Uses the compensator locking ring to tighten the short and long compensator in place. Long compensators uses a set screw to keep it in place. Easy to install for competition Reduces muzzle rise when...

Derya Arms

VR80 Compensator Long Comp. - Old

VR80 Long Compensator Version-1 Compensators Uses the compensator locking ring to tighten the short and long compensator in place. Long compensators uses a set screw to keep it in place. Easy to install for competition Reduces muzzle rise when...

Derya Arms

VR80 Short "Thick Boy - Holes" Barrel Shroud (for LONG HANDGUARDS)

VR80 Short "Thick Boy - Holes" Barrel Shroud (for LONG HANDGUARDS) Short "thick boy - holes" barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A...

Derya Arms

VR80 Short "Holey" Barrel Shroud (for LONG HANDGUARDS)

VR80 Short "Holey" Barrel Shroud Short "holes" barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Short Slotted Barrel Shroud (for LONG HANDGUARDS)

VR80 Short Slotted Barrel Shroud Short slotted barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Short Twisted Barrel Shroud (for LONG HANDGUARDS)

VR80 Short Twisted Barrel Shroud Short twisted barrel shroud made for aftermarket long handguards.   *THIS WILL NOT FIT YOUR FACTORY SPEC VR80 WITH SHORT HANDGUARD. *THIS WILL ALSO NOT ALLOW YOU TO PUT A COMPENSATOR ON WHETHER YOU HAVE A RIA COMP OR...

Derya Arms

VR80 Extended Handguards - Holes - Front & Rear Rail *BLEMISHED*

This product is BLEMISHED All items are sold in an "AS-IS" condition. We will not accept returns and refunds. Please read below for more information.RIA Imports / Derya - Factory VR-Series Forends VR80 Forend Assembly, Holes, Front & Rear Rail Each...

J&E Machine Tech

SOPMOD Mil-Spec Buttstock by J&E Machine Tech

SOPMOD Mil-Spec Buttstock by J&E Machine Tech Fits: AR10 / AR15 Mil-Spec SOPMOD Stock, Black Stock adjustable to 6 positions Made in the USA     **Proper gunsmith fitting required for accurate fit & safe function.  

J&E Machine Tech

SOPMOD Mil-Spec Buttstock + Buffer Tube Kit by J&E Machine Tech

SOPMOD Mil-Spec Buttstock + Buffer Tube Kit by J&E Machine Tech Fits: AR10 / AR15 Mil-Spec SOPMOD Stock, Black Stock adjustable to 6 positions Mil Spec Buffer Tube, Black (6061 T6 Aluminum) Spring 3 oz Buffer, Black Castle Nut Standard End Plate Made in...

J&E Machine Tech

Precision Front & Rear Aluminum Flip-Up Sights by J&E Machine Tech

Precision Front & Rear Aluminum Flip-Up Sights by J&E Machine Tech Slim Design for low profile Quick locking mechanism Quick target acquisition Precision rear sight     **Proper gunsmith fitting required for accurate fit & safe function.  

Derya Arms

VR80 "Holes" Furniture Set - Long Handguard/Barrel Shroud and Pistol Grip

#html-body [data-pb-style=GBE22U1]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body...

A3G Munitions

VR80 Extended Carbon Fiber Handguard by A3GMunitions

VR80 Extended Carbon Fiber Handguard by A3GMunitions Lightweight - 8.8oz Extended size M-Lok compatible attachments Please note that this is the handguard only and will NOT include muzzle devices, which are sold separately.   There...

Derya Arms

VR82 - 20 Ga. - 20rnd - Blued Finish

MODEL - VR82 CALIBER - 20 Ga. ROUND CAPACITY - 20rnd FINISH - Blued Finish MANUFACTURER - Derya Arms *Will only feed 2 ¾ shells Note: This will not fit your VR80. This is a proprietary magazine for a different firearm called VR82 RIA-MAG...

Derya Arms

Charging Handle Retaining Ball, VR60/VR80, 12GA, .198"/5MM

Charging Handle Retaining Ball, VR60/VR80, 12GA, .198"/5MM MF56 Derya Arms **Proper gunsmith fitting required for accurate fit & safe function.

J&E Machine Tech

Polymer Front & Rear Flip-Up Sights by J&E Machine Tech

Polymer Front & Rear Flip-Up Sights by J&E Machine Tech Spring-loaded flip up operation Tool-less front sight/elevation adjustment Constructed of High-Quality Polymer Attaches to Mil-Spec 1913 Picatinny Rails Includes x1 Hex Wrench     **Proper...

Hayes Custom Guns

Magazine ELS Attachment, 19rd

VR80 ELS mag attachment Compatible with Rock Island 19rnd magazines ONLY Allows you to mount the VR80 magazines to your ELS attachments on your belt.  The tabs on the male attachment have been modified to prevent them from locking into place...